Safety Barriers and Guarding: Open Area, Visibility and Strength Trade-offs

Every opening is a trade-off

Safety barriers and guards must stop people reaching a hazard, and they usually have to do more: let operators see the process, let air and heat escape, resist knocks from trolleys, and stay clean. Each of these pulls the design in a different direction, and open area is the number that links them.

What a higher open area gives you

  • Better visibility and light
  • More airflow and cooling
  • Less weight and often lower cost

What a lower open area gives you

  • A smaller opening, so objects and fingers are kept further from the hazard
  • A stiffer, stronger panel for the same thickness
  • More privacy, and less dust or debris getting through

Expanded or perforated?

Expanded metal gives a strong, rigid panel with a diamond pattern and is common on fences and machine guards. Perforated metal gives a flat surface with a regular hole pattern, and a cleaner look, which suits panels that people touch or that need a smooth finish. Our comparison of perforated and expanded metal sets out the differences.

A simple order of decisions

  1. Safety requirement. Take the maximum opening size and the safe distance from the standard or risk assessment that applies. This sets the limit that everything else must fit within.
  2. Environment. Heat, dust, washdown and outdoor exposure steer the material and finish.
  3. Visibility and airflow. Choose the highest open area that still meets the safety limit.
  4. Strength. Check thickness and frame against likely impacts. The panel is only as strong as its fixings.
  5. Appearance and visibility of the barrier itself. Safety colours help people see the barrier.

Do not forget

  • Edges should be rolled, banded or framed so that they cannot cut.
  • Access for cleaning, maintenance and emergency exit.
  • Signage and fixing points.

Use our open area guides to calculate the open area of your pattern. Safety compliance of the finished installation remains the responsibility of the designer and the site owner. Tell us the requirement with your enquiry, and options can be coordinated and confirmed for the project.